Euphonix FC727 Instructions d'exploitation télécharger pdf (Page 30)

Euphonix FC727 Format Converter Users Manual Pinout and Cable Specifications

A.2.1 TDIF

Figure A-2 shows the cable diagram. Table A-3 shows the pinout for the FC727/726’s

TDIF connector.

Figure A-2 DB-50-to-DB-25 TDIF cable assembly diagram

PARTS LIST

Item Qty Mfr Mfr P/N Description

1 1 AMP HDP-20 series DB50-M

2 1 AMP HDP-20 series DB25-M

3 40 inches Madison

Approx. 1 meter

(38 to 40 inches)

P/N 030-07657-01 Rev C

ITEM 1

DB-50 male metal backshell assembly

including thumb- or jack-screws

ITEM 2

DB-25 male with

metal backshell assembly

Cable labels

(typical)

TDIF

ITEM 3

SCSI cable, braided shield, low capacitance,

25 twisted pairs. Braided shields on both ends

clamped to metal backshells.

All conductors are not required.

Cut off unused wires at both ends.

Portion of braided shield pulled

back over cable insulation to

contact the cable clamp.

Heat shrink tubing to cover and

contain the exposed braid tails

TDIF

CH 1-8

50SDK00130 (or equiv) SCSI cable, 25 pairs

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Pas de commentaire

Euphonix FC727 Instructions d'exploitation Page 30